EX1A-6 MAT CTRCT 3 exhibit6-15.htm EXHIBIT 1A-6.15 Hess Legal Counsel: Exhibit 1A 6-15 - Filed by newsfilecorp.com

PURCHASE ORDER

Qnetic  
276 5th Avenue DATE 3/19/2026
Suite 704-3137, New York, NY 10001 PO # 2026-03-18-01
Website: www.qnetic.energy  

VENDOR   SHIP TO
ESEA COMPOSITES SRL   Loic Bastard
Via Nazionale 56/A,   Qnetic Corporation
Cepagatti (PE)   Building B, Block 2, No. 1289 Duhui Road
ITALY, 65012   Shanghai, China 201109
Phone: +39 0871 562636    
Alessandro.liberatore@gruppoesea.it   Loic@qnetic.energy

SHIPPING TERMS PAYMENT TERM TARGET DELIVERY
     
FCA - ESEA Facility (Incoterms 2020) As per attached͏ Offer͏ P0260127͏ rev͏ 02͏ Section 8,͏ 9͏ and͏ 10. 7/1/2026
     



 
   
   
   
  
ITEM #
DESCRIPTION   RV     QTY     UNIT PRICE     TOTAL  
1   STEP͏ 1͏ -͏ Tooling:͏ Mould͏ Tool for͏ Drilling         1   € 37,700.00   € 37,700.00  
2   STEP͏1͏ -͏ Manufacturing:͏ Carbon͏ Fiber͏ Hub         1   € 28,000.00   € 28,000.00  
3   STEP͏2͏ -͏ Tooling:͏ Mould,͏ Winding͏ Shaft͏,͏ Trolley         1   € 60,900.00   € 60,900.00  
4   STEP͏2͏ -͏ Manufacturing:͏ Compression͏ Shaft         1   € 37,800.00   € 37,800.00  
5   STEP͏3͏ -͏ Tooling:͏ Mould         1   € 43,500.00   € 43,500.00  
6   STEP͏3͏ -͏ Manufacturing:͏ Precore͏ Junction͏ Ring         1   € 29,000.00   € 29,000.00  
7   STEP͏4͏ -͏ Tooling:͏ Cutting͏ System,͏ Vertical͏ Assembly͏ Support͏ &͏ Apollo͏ Modification         1   € 124,400.00   € 124,400.00  
8   STEP͏4͏ -͏ Manufacturing:͏ Inner͏ Core͏ Fabrication         1   € 73,000.00   € 73,000.00  
9   STEP͏5͏ -͏ Tooling:͏ Skirt͏ Mandrel         1   € 23,500.00   € 23,500.00  
10   STEP͏5͏ -͏ Manufacturing:͏ Final͏ Rotor͏ Assembly         1   € 52,200.00   € 52,200.00  
                             
Comments or Special Instructions             SUBTOTAL   € 510,000.00
This Purchase Order is issued in accordance with ESEA Offer P0260127 rev 02 (17 Mar 2026) and General Terms and Conditions of Supply signed on 17 Mar 2026. The rotor shall conform to Qnetic Specification Q5178D revision 10 (attached). All attachments form integral parts of this PO.                    
                  TOTAL   $ 510,000.00  



Revision Date Description
02 17/03/2026 Second Revision

  Responsability Company Date Signature
Produced by Proposal Team ESEA 10/3/26 Giustiniano Andreassi
Verified by Proposal Team ESEA 10/3/26 Ruggero Pitzolu
Authorized by Proposal Team Leader ESEA 10/3/26 Alessandro Liberatore

Documents attributes
Project  PULSAR ROTOR
Customer  QNETIC Corporation
Classification  Industrial
File name  P0260127_rev02

 


 

Dear Sir,

Thank you very much for your inquiry. We submit our non-binding offer on the basis of your general request.

    Alessandro Liberatore
    CEO

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 1 of 13
 


DECLARATION OF COPYRIGHT RIGHT

This document and its contents are the property of ESEA COMPOSITES, with all rights reserved. According to copyright laws, this document may not be copied, reproduced, translated or reduced to any electronic medium or machine-readable form, in whole or in part, without the prior written consent of ESEA COMPOSITES. The information contained in this proposal remains the intellectual property of ESEA COMPOSITES, even if customized according to the specific needs of customers. Upon acceptance of this proposal, issuance of a purchase order, and subsequent delivery of formal documentation, the intellectual property specifically developed under the terms of the contract will be transferred to the Client.

Any information provided by the Customer to finalize this technical proposal remains the property of the Customer. ESEA COMPOSITES undertakes to keep this information confidential and shall not use it for any purpose unrelated to this project. ESEA COMPOSITES confirms that it is not bound by any third-party agreement that would limit the delivery of the items offered. The Client undertakes not to disclose or disseminate the content of this document without the written consent of ESEA COMPOSITES.

THESE "QNETIC SPECIAL TERMS AND CONDITIONS" ADAPTED TO THE CUSTOMER'S SPECIFIC ORDER PREVAIL OVER THE "GENERAL TERMS AND CONDITIONS OF DELIVERY" SET OUT IN THE ANNEX ONLY IF THEY CONFLICT WITH THEM. THE "GENERAL TERMS AND CONDITIONS OF SUPPLY" PREVAIL UNLESS OTHERWISE PROVIDED AND REGULATED IN THE "SPECIAL TERMS AND CONDITIONS OF SUPPLY QNETIC".

"THE 'QNETIC SPECIAL TERMS AND CONDITIONS' ADAPTED TO THE CUSTOMER'S SPECIFIC ORDER PREVAIL OVER THE 'GENERAL TERMS AND CONDITIONS OF DELIVERY' AND THE 'TECHNICAL SPECIFICATION' ONLY IF THEY CONFLICT WITH THEM. THE 'GENERAL TERMS AND CONDITIONS OF SUPPLY' PREVAIL OVER THE 'TECHNICAL SPECIFICATION' UNLESS OTHERWISE PROVIDED AND REGULATED IN THE 'SPECIAL TERMS AND CONDITIONS OF SUPPLY QNETIC'."

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 2 of 13
 


SUMMARY

1. SCOPE 4
     
2. REFERENCE 4
     
3. BRIEF DESCRIPTION 4
     
3.1 GENERAL ROTOR DATA 4
     
3.2 DEVELOPMENT OF THE FIRST ARTICLE 4
     
3.3 TOOL WORK PACKAGE 4
     
3.4 SMALL BATCH PRODUCTION  5
     
4. NOT INCLUDED 6
     
5. DELIVERY DATE 7
     
6. PRODUCTION STRATEGY FIRST ELEMENT 7
     
7. LIABILITY 8
     
8. PRICE LIST 1ST ITEM  9
     
9. PAYMENT TERMS 1st ITEM  10
     
10.   PRICE LIST 2ND to 4th ITEM  10
       
11.   PROJECT SCHEDULE CLAUSE  10
       
12.   ELEMENTS NOT YET REFLECTED IN THE ROTOR SPECIFICATION OF THE Pulsar Q5178D REV 10 FLYWHEEL  11
       
13.   CHANGES, DELAYS AND CANCELLATIONS 11
       
14.   COLLECTION AND/OR DELIVERY:  11
       
15.   EXAM AND ACCEPTANCE:  12
       
16.   MISCELLANEOUS 12

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 3 of 13
 


1. SCOPE

In response to the request of the CUSTOMER (QNETIC), we are pleased to present our proposal for the development of the project steps related to the feasibility study and the development of the project of "rotors for the Pulsar energy storage system", according to the specifications, the program and the project provided by the CUSTOMER. Although the project is aimed at the production of the prototype and any other units, the individual processing steps by ESEA are to be understood as autonomous and independent of each other.

2. REFERENCE

N.A.

3. BRIEF DESCRIPTION

The CUSTOMER (QNETIC) intends to entrust ESEA with the feasibility study and the development of individual steps forward, to be carried out according to the program and the project provided by the CUSTOMER, aimed at the production of a prototype of a "rotor for the Pulsar energy storage system" and possible production of a total of "4 rotors" by ESEA, according to the specifications indicated and provided by the CUSTOMER (QNETIC);

3.1 GENERAL ROTOR DATA

Rated Outer Diameter: 1,600 mm.
Total length: 3,285 mm (Hard constraint)
Total Rotor Mass: 4,500 ± 10 kg (less than 0.23%)
Rated wall thickness 200 ±10 mm (this shall be ultimately driven by the rotor mass target)
Materials: T700S 24K Carbon Fiber (provided by Qnetic, not included in ESEA proposal)
  Epoxy resin system hardened with elastomer ((provided by Qnetic, not included in ESEA proposal).

3.2 DEVELOPMENT OF THE FIRST ARTICLE

ESEA confirms its technological and operational readiness to support this phase as well, including the analysis of manufacturability and process validation. Laser tracker control is included in the proposal.

3.3 TOOL WORK PACKAGE

ESEA will take care of the design study, engineering and supply of the complete package of tools as follows:

➣ Winding Machine Extension Shaft: ESEA will design and manufacture the extension shaft for the winding machine, ensuring full mechanical compatibility with the mandrel and the required torsional rigidity to support the rotor's weight (4,500 kg) during fiber deposition, while minimizing structural deflection. 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 4 of 13
 


➣ Production Trolley (Winding Kart): A dedicated production trolley will be provided for the safe handling of the rotor within the facility. The design will feature dampened supports and locking systems to prevent surface damage to the carbon fiber laminates during transfers between winding and curing stations.

➣ Carbon Fiber Laminate Tools (skirt mandrel) ESEA will develop specific tooling for the carbon fiber lamination, focusing on geometric precision and thermal stability.

➣ Compression Shaft & Precore Junction Ring Mandrels: Precision mandrels for the compression shaft and the Precore junction ring will be manufactured. These tools will be engineered to facilitate easy assembly and de-molding without inducing mechanical stress on the green composite parts.

➣ Vertical Assembly Support: ESEA will provide a vertical assembly support structure, essential for maintaining axial alignment between the two hubs within the ±0.05 mm tolerance. The support will be sized to safely withstand the 725 Nm torque requirements during titanium bolt tightening.

➣ Tool to laminate rotor carbon fiber hub.

3.4 SMALL BATCH PRODUCTION

ESEA will carry out the production of the rotors in accordance with the procedures described in the PULSAR ROTOR TECHNICAL SPECIFICATIONS: Q5178D Pulsar REV 10 flying rotor specification provided by the CUSTOMER (QNETIC).

Production will be carried out via the E.T.T.P. (ESEA Technological Transfer Platform), located at the ESEA headquarters in Italy. The E.T.T.P. ecosystem enables technical advantages and process improvements for the Pulsar project:

➣ AFP (Automated Fiber Placement), TOW preg technology (not included in the production of first item, but available for next production).

➣ Process Traceability: All E.T.T.P. machines are integrated with SCADA SOFTWARE, enabling the real-time collection and archiving of all production data, curing cycles, and winding parameters for full digital traceability.

➣ High-Precision Metrology via FARO Vantage S6: For long-range measurements with ultra-high precision, ESEA utilizes the FARO Vantage S6 Laser Tracker. This system is critical for aligning metal hubs on large- scale composite structures.

• Volumetric Accuracy: Up to 0.016 mm at 10 meters. This level of precision is vital: to guarantee the required 0.05 mm tolerance on the part, the measurement tool must be at least 3-5 times more precise than the target.

• Operational Range: Up to 80 meters. This significantly exceeds the 3.3-meter rotor requirement, ensuring all measurements are taken within the laser's peak precision zone.

• ActiveSeek Technology: This feature allows the laser to instantly re-acquire the target (SMR) if the beam is interrupted, which is highly effective on the shop floor while the filament winding machine is in motion. 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 5 of 13
 


➣ Metrological operating procedure

To ensure compliance with the strict tolerances defined in the Q5178D specification, ESEA will implement the following metrology protocol:

1. Axial Alignment Verification (Target: ± 0.05 mm):

• Methodology: The Laser Tracker defines a virtual "Cylinder Axis" as the main reference.

• Process: The spherically mounted retroreflector (SMR) is placed at several points along the lower flange of the hub and then the upper flange.

• Analysis: Using FARO BuildIT software, ESEA will instantly calculate the axial deviation between the two centers, allowing for real-time verification of alignment.

2. Run-out Control (Target: ± 0.127 mm)

• Methodology: Dynamic mapping of surfaces during rotation.

• Process: As the mandrel rotates slowly on the Filament Winding (FW) lathe, the Laser Tracker records thousands of data points on the outer surface of the hub flange.

• Outcome: The system generates a high-resolution Heat Map (Color Map). This visual data identifies any eccentricity with extreme precision, allowing immediate adjustment or final validation of the concentricity of the composite with respect to metal hubs.

Please note that ESEA's activities are strictly limited to the measurement and data collection process. Due to the extreme complexity of the process, ESEA cannot guarantee compliance with the final tolerance requirements Run- out Control (Target: ± 0.127 mm) - Axial Alignment Verification (Target: ± 0.05 mm). This is due to several external factors beyond ESEA's control, including:

  • Third-Party Components: The manufacturing of parts that are not the responsibility of ESEA.
  • Thermal Deformation: Structural changes introduced during the curing process (even though ESEA will utilize low-temperature curing resins).\
  • Customer Design: The inherent structural and engineering design provided by the client.

Consequently, the achievement of these requirements must be ensured through a final setup procedure developed by Qnetics.

4. NOT INCLUDED

The following elements and activities are currently outside the scope of this proposal or are subject to any further economic and timing definitions:

➣ Resin System, Carbon Fiber, auxiliary as resin connector, Twill Prepreg Glass Fibre for inner core, FLEXIBLE EPOXY ADHESIVE: To Be Defined (TBD).

➣ Ultrasonic Non-Destructive Testing (NDT): Implementation of ultrasonic inspection is currently under evaluation. A specific cost confirmation and technical feasibility report will be submitted upon further definition of the inspection requirements. ESEA is able to produce the NDT STANDARDS for the calibration of the equipment's mandatory for the DEFINITION of ACCEPTANCE INSPECTION CRITERIAS LIST 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 6 of 13
 


➣ Test Sample (Coupon) Testing: Unless otherwise specified, the production and testing of characterization coupons (e.g., tensile, compression, or interlaminar shear testing) are not included in the standard lot quotation and will be quoted separately according to the required test matrix.

➣ Shipping Crates QNETIC is required to define the preferred shipping method and environmental protection (humidity and vibration control) to preserve the integrity of the rotor during final logistics.

➣ Design Responsibility: ESEA is responsible for the manufacturing engineering, design for manufacturing and the design of the production tooling. However, the overall structural design, functional specifications, and final engineering of the Pulsar Rotor remain the sole responsibility of the Customer (Qnetic).

All "raw materials", raw materials (RAW Material) and accessories (Ancillary) are excluded from the economic proposal and remain at the expense of the CUSTOMER (QNETIC) who will bear the costs and supply in favor of ESEA according to the program. The "consumable" and processing material remains the responsibility of ESEA.

5. DELIVERY DATE

The following timeline is estimated based on current technical assumptions and resource availability:

The timing is not binding, as it varies according to the availability of materials, the difficulties deriving from a prototype processing, inconveniences and unforeseen events encountered during development, problems related to third party suppliers and the rapid responsiveness of QNETIC, although ESEA will do its utmost to speed up the execution of the processing steps.

6. PRODUCTION STRATEGY FIRST ELEMENT

ESEA's optimized production strategy for the "Pulsar rotor" is based on a 6-tow configuration operating at a constant winding speed of 20 m/min. This configuration represents the "sweet spot" for a component of this scale, balancing high production capacity with extreme geometric precision. Key benefits: 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 7 of 13
 


A. Increased Throughput: By utilizing 6 tows simultaneously, we achieve a deposition rate of approximately 17 kg/hour. This reduces the net winding time for the 4.5-ton rotor to approximately 265 hours (roughly 11 days of FW continuous operation).

B. Structural Stability: A wider 6-tow band distributes the compaction pressure more uniformly across the liner, minimizing the risk of localized radial deformation compared to a narrower 4-row band.

C. Process scalability: This configuration optimizes the use of our in-house TowPreg manufacturing, ensuring a consistent supply of materials while maintaining strict control over the resin-to-fiber ratio (±1%).

D. Geometric accuracy: Operating at 20 m/min with a 6-feed head allows us to maintain the required axial alignment of ±0.05 mm and 0.127 mm run-out, reducing the total number of head passes and mechanical wear during the long-term winding cycle.

It is understood that what is described above represents a "reference objective" of the prototype, but does not commit ESEA to the achievement of these results, but rather ESEA will take care of the scans and measurements of the elements, providing the CUSTOMER (QNETIC) with dimensional surveys and tolerance discrepancies in order to agree together on any corrective strategies.

The machining processes are based on assumptions that can be different during real production depending on the properties of the material (fiber, resin, paper, etc.), the orientation of the fibers, the geometry of the parts produced (edge, edge, etc.).

7. LIABILITY

ESEA will not be held responsible for any consequences arising from the use or operation of the equipment and rotors supplied. ESEA's responsibility is strictly limited to ensuring that the equipment and components supplied comply with the technical specifications defined and provided by the CUSTOMER (QNETIC) and agreed upon and with the quality standards defined in document Q5178D.

ESEA shall not be liable for direct or indirect damages resulting from equipment downtime, including but not limited to: loss of efficiency, loss of production, loss of profits, or any increase in operating costs incurred by the Buyer.

ESEA will not be required to provide compensation for any damage beyond the repair or replacement of non- conforming parts. The Buyer expressly agrees, on its own behalf and on behalf of its insurers (so-called right of subrogation), to waive any right to compensation and reimbursement against ESEA for incidental or consequential losses and undertakes to indemnify ESEA in this regard.

ESEA is responsible for the production engineering, design for production and design of the production tools according to the technical specifications for each step provided by the CUSTOMER (QNETIC). The overall structural design, functional specifications and final engineering of the Pulsar rotor and the design responsibility remain the sole responsibility of the CUSTOMER (QNETIC). 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 8 of 13
 


8. PRICE LIST 1ST ITEM

Each step indicated below is to be considered independent and autonomous (Independent lots / Independent work packages) and must be remunerated regardless of the achievement of the subsequent steps and/or the completion of the entire project which, in fact, is divided into lots and/or separate and possible steps (Separate tenders/contracts - independent or standalone phases)

STEP 1 MANUFACTORING CARBON FIBER HUB EURO 28,000.00
STEP 1 TOOLING MOULD
TOOL FOR DRILLING
EURO 37.700,00
STEP 2 MANUFACTORING COMPRESSION SHAFT EURO 37.800,00
STEP 2 TOOLING MOULD
WINDING SHAFT
TROLLEY
EURO 60.900,00
STEP 3 MANUFACTORING PRECORE JUNCTION RING EURO 29,000.00
STEP 3 TOOLING MOULD EURO 43.500,00
STEP 4 MANUFACTURING INNER CORE MANUFACTORING EURO 73.000,00
STEP 4 TOOLING CUTTING SYSTEM
VERTICAL ASSEMBY SUPPORT
APOLLO MODIFICATION
EURO 124.400,00
STEP 5 MANUFACTURING FINAL ROTOR EURO 52.200,00
STEP 5 TOOLING SKIRT MANDREL EURO 23.500,00

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 9 of 13
 


9. PAYMENT TERMS 1ST ITEM

Tooling payment terms (each STEP). The following payment terms apply to each individual item listed:

  • 40% Down payment upon placement of the Purchase Order.
  • 30% Milestone payment upon CDR (Critical Design Review) approval.
  • 30% Final balance upon tool availability for the production phase.

Rotor Manufacturing payment terms (each STEP)

The following payment terms apply to each individual item listed:

  • 40% Down payment upon placement of the Purchase Order.\
  • 60% Final balance upon item FAT for the production phase.

10. PRICE LIST 2ND TO 4TH ITEM

Rotor manufacturing 2-4 article EURO 180.000,00 each

Payment Terms (Applicable to Each Individual Item). The following payment terms apply to each individual item listed:

  • 40% Down payment upon placement of the Purchase Order.
  • 60% Final balance upon item FAT for the production phase.

The purchase of rotor production item 2 is a continue to the success of the rotor production FAT for the first item.

The purchase of rotor production item 3 is conditional on the success of the FAT of rotor production item 2.

The purchase of Article 4 on the manufacture of rotors is conditional on the success of the FAT of Article 3 on the manufacture of rotors.

The aforementioned price refers to the configuration and information shared so far. We reserve the right to update our technical and economic proposal in the event of changes to the product.

11. PROJECT SCHEDULE CLAUSE

Within 15 working days of receipt of the initial payment, ESEA will provide a detailed timetable specifying all major milestones, including completion of tooling engineering, tooling, validation of the resin system, start of winding, completion of winding and final delivery window. ESEA will notify QNETIC in writing within 5 working days if any milestone is at risk of delay.

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 10 of 13
 


12. ELEMENTS NOT YET REFLECTED IN THE ROTOR SPECIFICATION OF THE PULSAR Q5178D REV 10 FLYWHEEL

➣ NO layer of EPM elastomer will be used in the production of the first rotor item.

➣ The metal hub will be modified to allow the recovery of the rotor alignment if the first item is out of tolerance. QNETIC will provide the updated drawing to ESEA for modification subject to relisting and/or bidding.

➣ QNETIC will introduce a new solution to minimize risks during the extraction phase. This solution can include selecting a release agent, modifying the pre-core windings, and designing the extraction tool.

13. CHANGES, DELAYS AND CANCELLATIONS:

Progress report: ESEA will provide updates on the progress of the project twice a week, in written form or via a short progress meeting, summarizing the current status, identified risks, mitigation actions and planned next steps.

If the buyer requests or causes changes to be made to the services/machinery, its design, or assembly site, or delays or interrupts the progress of the work, or lacks facilities, equipment, or testing materials to be provided, it will reimburse the contractor for any additional costs or expenses that result.

In the event that the purchaser requests a suspension and/or delay in the services and/or shipment of the "Machinery" or any part thereof, or in the assembly thereof, the full purchase price plus any applicable maintenance costs (less the amount of any incomplete work) shall be due and immediately upon shipment, or if not shipped, from the date the service/Equipment is declared ready.

Either party is free to withdraw from this agreement after the completion of each STEP and before the start of the next STEP. If the Buyer withdraws, the Buyer shall compensate the Supplier as agreed and reimburse all costs and expenses incurred in carrying out the completed STEPs. If the Buyer withdraws, ESEA shall return any unused materials provided by the Buyer without any further charge, refund, or compensation.

14. COLLECTION AND/OR DELIVERY:

Pick-up is provided at ESEA's headquarters unless otherwise agreed and in such a case ESEA, in the event of acceptance, will determine the price and choose which carrier will be used for any shipment, unless the Buyer has asked the Contractor for a route of its choice prior to shipment. The Contractor reserves the right to make partial shipments as it deems appropriate. Upon acceptance, the Contractor shall pack and/or crate the machinery to the standards established for domestic shipping. Any risk of loss or damage will pass to the buyer when the machinery is delivered to the carrier.

Shipping, Handling and Incoterm Clause

The delivery time will be FCA - ESEA structure (Incoterms 2020). The risk is transferred to QNETIC upon loading the goods onto the carrier designated by QNETIC. The logistics, costs and expenses for packaging and special packaging of the machinery abroad are the sole responsibility of the Buyer.

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 11 of 13
 


15. EXAM AND ACCEPTANCE:

FACTORY ACCEPTANCE TEST (FAT) CLAUSE: QNETIC reserves the right to carry out a Factory Acceptance Test (FAT) at the ESEA facility prior to shipment to verify compliance with the agreed technical specifications of the Pulsar Rotor. The FAT performed via visual inspection, dimensional measurement, mass control, review of SCADA process records. ESEA will provide reasonable access workspaces and staff to support the FAT. The shipment can only proceed after the successful completion of the FAT and written confirmation from QNETIC.

ESEA will share the FAT document for each individual STEP 1 week before execution.

Please note that ESEA's activities are strictly limited to the measurement and data collection process. Due to the extreme complexity of the process, ESEA cannot guarantee compliance with the final tolerance requirements (Run-out Control (Target: ± 0.127 mm) ; Axial Alignment Verification (Target: ± 0.05 mm)). This is due to several external factors beyond ESEA's control, including:

  • Third-Party Components: The manufacturing of parts that are not the responsibility of ESEA.
  • Thermal Deformation: Structural changes introduced during the curing process (even though ESEA will utilize low-temperature curing resins).
  • Customer Design: The inherent structural and engineering design provided by the client.

Consequently, the Achievement of these requirements must be ensured through a final setup procedure developed by QNETICS.

16. MISCELLANEOUS

➣ All specified production speeds, temperatures, cycles, solvents, lubricants, materials, and products conform to European standards, unless otherwise noted, and any other measurement methods, grades, classes, or types must be equivalent to Italy standards as described. All times mentioned herein for delivery, erections, testing or other performance of work are based on working assumptions and the normal standards and practices of business, transport and work in Italy and must be a utopianly extended law to comply with any local norms or practices of business, transport or work that differs from Italian standards and practices.

➣ There are no verbal agreements or understandings outside of the Proposal, and acceptance by the Buyer takes place without any other conditions, unless otherwise agreed in writing by the Contractor. Any modification, modification, substitution, or addition in the Equipment or service of this Proposal will not be made unless described in writing and signed by Buyer and Contractor. The purchaser shall pay for any variation, modification, substitution, or addition to the then-current prices in addition to the Purchase Price set forth below.

➣ This proposal ("Proposal") constitutes a valid contract between the Contractor and the Buyer when the offer is confirmed by the Buyer and with the subsequent execution of the acceptance of such offer by the Contractor at its principal place of business in Cepagatti (PE), Italy. The contract is considered to have been stipulated in Cepagatti (PE), as the place of performance of the obligations at the headquarters of ESEA, as the domicile of the creditor at the time of the maturity of the obligation (Forum destinatae solutionis ex art. 1182 of the Italian Civil Code) according to Italian laws.

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 12 of 13
 


➣ BUYER'S Offer: This offer is expressly conditioned upon Buyer's consent to all terms of this contract, notwithstanding any different or additional terms contained in any written submission or to be submitted to Contractor by or on behalf of itself relating to the subject matter hereof. Buyer's consent will be finally established by both Buyer's performance of this contract and Buyer's acceptance of any goods shipped under this Agreement. Contractor objects to any different and/or additional terms contained in any writing submitted or to be sent to Contractor by or on behalf of Contractor relating to the subject matter in question, and in no event shall such different and/or additional terms be deemed to form part of the contract between Buyer and Contractor. This Proposal shall be deemed withdrawn subject to execution and returned to the Contractor within sixty (60) days from the date on which it is stated.

➣ For anything not expressly determined and regulated directly in the present "QNETIC SPECIAL SUPPLY CONDITIONS" adapted to the specific order of the QNETIC CUSTOMER, the "GENERAL SUPPLY CONDITIONS" attached to this contract as an integral part thereof shall apply.

The following documents are an integral and essential part of this contract:

1) General Terms and Conditions of Supply;

2) The Qnetic Specification document ROTOR SPECIFICATION OF THE PULSAR Q5178D REV 10

For ratification and approval:

Date : 17th March 2026

Location: Cepagatti (PE)

QNETIC CORPORATION    
Loic Bastard CTO  
   
 

 

ESEA COMPOSITES SRL
REGISTERED OFFICE: Contrada Villanesi 50/A - Francavilla al Mare (CH) 66023
OPERATING OFFICE: Via Nazionale 56/A, Cepagatti (PE) 65012
VAT: 02793440690
Pg. 13 of 13
 


GENERAL TERMS AND CONDITIONS OF SUPPLY

These general supply conditions are an integral and substantial part of the specific supply conditions dedicated to the specific customer and must be returned duly signed together with the other contractual documents.

The "QNETIC General Terms and Conditions of Supply," adapted to the specific customer order, prevail over the "General Terms and Conditions of Supply" contained in this document in the event of a conflict between the documents. The "General Terms and Conditions of Supply" prevail and apply unless otherwise provided and regulated in the "QNETIC General Terms and Conditions of Supply."

FOREWORD

A) These General Terms and Conditions are strictly confidential and cannot be disclosed. The definitions and the premise are integral and substantial parts of this document.

B) No amendment to this Agreement shall be binding on either Party unless such modification is made in writing, accepted and duly signed by the persons performing this Agreement or their respective successors.

C) This Agreement is therefore the one and only legal instrument to regulate the relationships that arise between the Parties that sign it in relation to the above, both commercial, technical and industrial, also collecting and incorporating all previous agreements (both verbal and written) that have taken place up to the Start Date and understood as actions and activities preparatory to the drafting of this Agreement.

D) The Documents applicable to this Agreement are as follows:

I. The Special Conditions of Supply, if any.

II. The General Terms and Conditions of Supply, if any.

III. The Company's Code of Ethics (published in compliance with Italian Law Legislative Decree 231/01) if present and attached to this Agreement.

IV. Any Proprietary Information exchanged between the Parties, provided in the course of business and associated with the purpose of this Agreement.

V. Any information marked as "Confidential" and/or "Security Classification" exchanged between the Parties and rendered in the course of activity associated with the Purpose of this Agreement.

VI. Any Purchase Order (PO) and/or ANNEX mentioned in this contract and attached.

APPLICATION

A) The following General Terms and Conditions of Purchase apply to all goods and services purchased by the CUSTOMER referred to in the Purchase Order.

B) All purchases by the CUSTOMER are expressly limited and conditioned by the acceptance of the provisions of his Purchase Order including the following General Conditions of Purchase.

C) All provisions (printed or not) contained in any other document are not accepted, unless they have been specifically and expressly agreed in writing by a duly authorized representative.

D) The Conditions, together with the Order, the Order Confirmation and any SPECIAL CONDITIONS OF SUPPLY, constitute an integral and substantial part of the Contract for the sale of the Products. In the event of discrepancy between the provisions of the various contractual documents, those contained in the Order Confirmation and in the SPECIAL CONDITIONS OF SUPPLY prevail over those contained in these GENERAL CONDITIONS OF SUPPLY and the latter prevail over those contained in the Order. Any general conditions of purchase of the CUSTOMER, where not expressly accepted by ESEA, even if reported in the Order and/or on the back of the Order, will not, in any case, be applicable.


E) Orders must always be in writing and are accepted by ESEA with the transmission to the CUSTOMER of the Order Confirmation. The Contract is concluded between the Parties when ESEA, after receipt of the Order, has communicated in writing to the CUSTOMER the acceptance of the same through the Order Confirmation. As soon as the CUSTOMER receives the Order Confirmation, he must check all the data contained therein; they are considered accepted by the CUSTOMER if they are not immediately contested in writing by the same. Products and services not expressly described in the Order Confirmation will be invoiced separately.

F) This agreement is considered finalized at the ESEA Headquarters and commenced on the date of the Order Confirmation and will remain in force for the period necessary for the execution of the Order. The obligations of confidentiality, protection and non-disclosure remain even after the expiry of the contract, as specified below.

G) Any modification or cancellation of Orders will be acceptable, provided that ESEA receives it within 5 days from the date of sending the relevant Order Confirmation. The CUSTOMER may request the temporary suspension of the work in any step of progress for a maximum of 15 days, the prolonged suspension for a longer time, if granted and without prejudice to the right of the Supplier to withdraw from the contract, will entail a daily penalty in favour of the Supplier equal to 0.3% of the order and/or of the single processing step.

H) If an O.d.A. refers to the execution of a Contract pertaining to and/or signed with the Armed Forces (Italian or Foreign Country), this will imply that the O.d.A. will be subject to the rules of the GQA (Government Quality Assurance) applied within NATO (STANAG 4107, AQAP-2070). In this case, it is mandatory to notify this case, under penalty of forfeiture of the obligations set out below. This will entail the obligation for the Supplier to guarantee free access to its Plants, at any time and without notice, to the Government Representatives of the FFAA, also providing the necessary assistance for the performance of the control activities inherent to the purpose of supply, without restriction or limitation of any kind.

I) With regard to the import/export obligations provided for by Law 185/1990, EU Regulation no. 2021/821 (dual-use goods and technologies) and the US I.T.A.R. legislation, the parties mutually and mandatorily, without delay, undertake to provide:

I. all the information necessary to correctly identify and classify the goods to be supplied and to specify clearly and comprehensively the existence of any restrictions on import and re-export;

II. any documentation related to the restrictions (and any changes thereto).

The defaulting party undertakes to indemnify the other party from any liability and also undertakes to indemnify it for any damages and/or charges that it may incur by virtue of such non-compliance, without prejudice to the incompressible right to terminate the O.d.A.

EXPORT CONDITIONS

A) The sale of the Products and their basic technology may be subject to export controls, according to the various local laws and regulations, by the different Authorities of each country where it is intended to market such Products. The CUSTOMER is responsible for complying with the laws, regulations and/or directives governing the importation of goods and the payment of duties in the country of destination up to the final consumer. 


B) ESEA may provide the CUSTOMER with the information and assistance reasonably requested by the other Party to obtain the authorizations, licenses required by local laws for the products to be exported, as well as to take any timely steps to obtain the necessary supporting documentation.

TECHNICAL DOCUMENTATION

A) The CUSTOMER guarantees the accuracy of the terms and conditions relating to each Order and each Order Confirmation and declares to have carefully checked, before sending the Order, all the Technical Documentation.

B) It is the CUSTOMER's responsibility to test and validate the Products, before proceeding with their marketing and/or use, ascertaining in advance their technical and application compatibility: a) with its own machinery and instrumentation or with those of third parties/end customers; b) with the climatic and operating conditions expected in the sites where the CUSTOMER's final products will be used; c) with combinations and/or connections to other machine-components, with which the ESEA products must interact, without any objection to ESEA in relation to the Products; d) with the specific reference legislation in force on electromagnetic compatibility and safety, regardless of the certifications and/or declarations issued by the Supplier with reference to the Products.

C) The CUSTOMER must also verify the compatibility of the ESEA products, with other hardware and/or software components used by the CUSTOMER and/or third parties, as well as with the Development Environments and Tools.

D) ESEA reserves the right to make any changes to the Order of the Product, if the latter needs to be adapted to any internal or EU standard, or to be modified so as not to affect its quality or functioning, or to be replaced with the most recent series having a shape and/or function comparable to those replaced.

E) Any activity subsequent to the sale of the Product, by way of example but not limited to, the installation, assembly, configuration of the Product according to the needs of the CUSTOMER, is the sole responsibility, risk and responsibility of the latter, who is required to scrupulously observe the technical-operational instructions contained in any Technical Documentation.

PRICE

A) Unless otherwise agreed in writing, the Price refers to the Supply delivered EX WORKS LOADED, at the ESEA headquarters, where the Contract was concluded and includes the cost of packaging according to the ESEA standard, while it does not include taxes and duties on sales, customs duties, any other charges and VAT, if due. Any special packaging requested by the CUSTOMER and approved by ESEA will be at the expense of the CUSTOMER, if not already provided for and agreed in the appropriate ANNEX, if any.

B) ESEA reserves the right, at any time prior to delivery and upon notice to the CUSTOMER, to increase the price of the Products by no more than 5%, compared to the current price list and/or estimate, to cover any increase in expenses caused by factors beyond its control, such as, but not limited to: currency fluctuations on the foreign exchange market, currency regulations, changes in duties, significant increase in the cost of labor, materials or other processing costs, change in the date of delivery, the quantity of the Products, or any delay caused by the CUSTOMER's requests or failure to provide adequate instructions by the latter.

C) The prices applicable to the supplies will be solely and exclusively those indicated in the appropriate ANNEX (Special Conditions of Supply and/or Order Confirmation) attached to this Agreement. Therefore, any variation relating to the technical/performance specifications reported in the appropriate ANNEX that have been reflected in the ANNEX relating to prices and/or costs, must necessarily involve the amendment of the latter, unless otherwise agreed. Any amendment and/or addition to the ANNEX shall be in writing, issuing a new document with the appropriate revision index and date and duly countersigned by both Parties. 


D) Prices are expressed in EURO and possibly include the Packaging and all applicable Certifications or required practices within each O.d.A. (except for special requests which, if any, will be quoted on a case-by-case basis). With regard to any changes in prices due to substantial changes in procurement prices and/or labour costs (more than 5% - see letter 8), this must be preceded by specific notification by the Supplier to be sent by certified email and/or registered mail with return receipt, with a minimum notice of 90 (ninety) days in advance and will follow the aforementioned rule of amendment to the relevant ANNEX. Notwithstanding the above, the Parties have the right to reach a specific agreement, which must be stipulated in writing.

E) Any requests for additional documents applicable to the scope of the supply, but not mentioned within the Supervisory Board, nor within any other ANNEX, must be provided to the CUSTOMER upon request and the latter will bear the related costs.

INVOICING AND PAYMENTS

A) ESEA issues an invoice to the CUSTOMER at the time of delivery, or at any other time indicated in the specific ANNEX, after having communicated to the same the availability of the Product for collection, in the forms and in the manner indicated in the Order Confirmation.

B) Unless otherwise agreed, the CUSTOMER must pay the price of the Product by bank transfer to the account indicated by ESEA within the deadline indicated in the Order Confirmation or in the invoice or by the communication of availability for collection. Payment must also be made in the event of non-collection of the Products by the CUSTOMER, in the forms and terms indicated in the Order Confirmation. Transfer orders will be sent as "irrevocable and non-modifiable" and a copy of the aforementioned order must be sent to the ESEA Financial Office for appropriate information about the start of the payment process.

C) In the event that the CUSTOMER makes the payment after the terms established in the Order Confirmation or in the invoice, ESEA will accrue the right to interest on arrears pursuant to Legislative Decree 231/02, without prejudice to compensation for damages. ESEA will in any case have the right to suspend the delivery of the Products in the event of default by the CUSTOMER. For payments from abroad, the costs for the transfer of funds from the foreign bank to the Italian bank will be borne entirely by the CUSTOMER.

D) All payments are due without discount upon receipt of the contractor's invoice. Buyer shall pay to Contractor all State and Local Taxes such Contractor may or is required to collect from any Buyer in connection with this Proposal and, if not paid, to pay when due and all such Taxes to the appropriate authorities and to indemnify and save Contractor from all liabilities, damages, interest, penalties, losses, costs, actions, or proceedings arising out of non-payment. The terms of payment for the Equipment may not be reduced, postponed or changed after such Equipment has been delivered to the carrier, unless such Equipment is damaged or destroyed as a result of intentional conduct or gross negligence on your part.

E) Title and right of possession of the machinery shall remain with the Contractor until Buyer has made full and final payment. In the event of any failure to make any payment, the Contractor reserves the right, in addition to any other remedy which may be available to it at law or in equity, to recover any part of all machinery installed or supplied. No part "of the machine" will be considered a fixed element or part of the real estate due to its installation until the buyer has made all payments due. In the event that the Contractor decides to seize "the Equipment", they reserve the right to remove the Equipment, whether or not they are permanently attached to the property, without any liability to themselves.

In the event of non-payment, at its option, the Contractor may invoke a mechanical lien or other similar right provided for by the competent law. If the buyer fails to promptly fulfill any obligation, including the payment of money when due, in accordance with this document, the contractor may, at its option, without liability to it, suspend the production, shipment, or installation of the balance of the machinery. If Buyer fails to resolve any default within ten (10) days of notice, Contractor shall be entitled to terminate any settlement arising therefrom thereafter by notifying Buyers in writing, all without prejudice to the right to compensation for any damages that may have been suffered.


F) The place of performance of the obligations is the registered office of ESEA, as the creditor's domicile at the time of maturity of the obligation (Forum destinatae solutionis ex art. 1182 of the Italian Civil Code).

DELIVERY, PRODUCT COLLECTION, TRANSFER OF RISKS

A) Unless otherwise agreed, the delivery of the goods, with the relative transfer of the risk of loss and/or deterioration of the Product to the CUSTOMER, is intended as "Ex Works loaded", at the ESEA headquarters where the Contract is intended to be finalized and place of execution of the Contract and the obligations arising from it, according to the international "Incoterms" rules in force and from which the collection must be made.

B) Any delivery terms are set by ESEA in the Order Confirmation and/or in the ANNEX relating to the time line. If the CUSTOMER does not collect the Product within the delivery deadline or does not provide adequate delivery instructions, ESEA shall be entitled to be reimbursed by the CUSTOMER for all expenses incurred for the storage of the Product. Storage will be carried out at the CUSTOMER's risk.

C) The CUSTOMER is obliged to check the Products and report any shortages, before accepting delivery from the carrier (in the case of shipment) and before, therefore, signing the transport document for receipt. In the event that the packaging is obviously damaged following transport, the CUSTOMER must make a complaint to the courier immediately - i.e. at the time of delivery itself - or accept the goods "with reservation". ESEA will restore the damaged material only in the case of transport damage carried out by a courier appointed by ESEA itself. If, after accepting the goods, the CUSTOMER finds that the Product is different from what was ordered, in terms of code or quantity, size and/or aesthetic characteristics, he/she will send ESEA an appropriate complaint report, indicating all the correct references (order and/or delivery note) and the details of the inconsistency, within 5 (five) days from the date of receipt of the material. Any complaints received after the deadline indicated above may, at ESEA's discretion, not be taken into consideration.

D) Unless otherwise provided, the delivery of the Products is considered completed upon the positive outcome of the Control and/or Testing and/or Commissioning procedures, during the Material Acceptance phase.

E) Unless otherwise provided, ownership of the Products will only pass upon full payment of the Total Price to ESEA.

F) ERECTION AND START-UP: if foreseen and/or a consequence of the execution of the contract, the Contractor's "Field" Engineer must be the final authority on the site until the Buyer carries out the complete and definitive acceptance of the machinery. Purchaser's management, engineering, operation, maintenance, and installation initiation personnel shall provide any assistance required by the Contractor's Field Engineer and in no way obstruct the order of his or her work or cancel any of his orders or instructions.

The buyer also undertakes to:

Receive all the necessary materials for installation and start-up and place them in one or more points near the construction site; - Provide adequate facilities and spaces for the erection and safe storage of any materials and equipment used or to be used in such work; - Clear the place, make all cuts, repairs, repairs and modifications to the existing building, provide all foundations, foundation bolts, plumbing, electrical wiring and connections necessary for the proper assembly and installation of machinery, all in accordance with the contractor's drawings and instructions; - Provide, free of charge, any electricity, compressed air, lighting, heating and fire protection necessary for installation or installation; - Provide the skilled labor, materials, and tools necessary, in the opinion of the Contractor, to accurately test and adjust the performance of the Machinery; - Provide sufficient and adequate new material for testing purposes and all laboratory and field testing equipment with experienced operators, when and as required by the Contractor. All waiting time spent by the Field Engineer, caused through no fault of his/her own, shall be charged to the Buyer.


OBLIGATIONS OF THE CUSTOMER

A) The CUSTOMER is solely and exclusively responsible for the choice of the Products ordered and/or purchased, as well as for all activities subsequent to delivery, such as the installation, handling, assembly, configuration and maintenance of the Product at its own premises (as well as those of its customers or third parties), which must be carried out in full and strict compliance with the instructions provided in the Technical Documentation.

B) The CUSTOMER must also be in possession of the structures and skills, including technological ones, necessary for the correct use of the Product. For the purposes of correct installation and subsequent regular operation of the Product, the CUSTOMER is required to comply with all the obligations listed in the Technical Documentation with the utmost diligence and must comply with all local laws and regulations in force in the country in which the Product is to be used, including those on safety and protection of public health and good commercial practices. Any cost inherent in the conformity of the Product with the regulations of the country in which it is to be used will be borne exclusively by the CUSTOMER.

C) Buyer shall indemnify, defend, and hold Contractor harmless from any loss or damage to Contractor's equipment at the place of erection caused by fire, vandalism, acts of God, or adverse weather conditions.

WARRANTIES AND LIABILITY

A) Without prejudice to any other provisions of these General Terms and Conditions of Sale, and within the limits of what is provided for by mandatory legal regulations, ESEA's liability for claims arising from defects or defects in the quality of goods or services supplied under these General Terms and Conditions is limited as follows:

I) ESEA warrants for a period of 12 (twelve) months from their production and/or making available to the CUSTOMER that the Products are free from manufacturing or operating defects. During the warranty period, ESEA undertakes to repair or, at its own discretion, to replace, at its own expense, all Products that will be returned and/or found to be non-compliant;

II) ESEA shall not be liable for the costs of locating defects or removing them, transporting them, or relocating Products found to be defective;

III) Under no circumstances will ESEA be liable for defects in the Products that have not been reported promptly, or in any case not beyond the warranty terms provided for (12 months from production and/or made available for collection in favour of the Customer and/or delivery) and for which the Customer does not have the opportunity to view the disputed components. The condition for the warranty is that the entire delivery is regularly checked and maintained by qualified technicians of the Manufacturer.

IV) It is in any case the responsibility of the CUSTOMER to verify and certify that ESEA products comply with the standards in force in the country in which they are installed, as well as to verify and certify that they fully meet the requirements relating to the required performance, specifications or technical characteristics. 


V) ESEA is not responsible for malfunctions due to non-conformities/incompatibilities of the hardware or software/firmware supplied and/or developed according to the CUSTOMER's indications and/or highlighted in the specific application of the CUSTOMER.

VI) ESEA does not assume any warranty for defects in the Product that derive from: failure to comply with the instructions contained in the Technical Documentation, tampering, improper use, incorrect installation, incorrect use, negligent maintenance, repairs, modifications or alterations made or caused by the CUSTOMER and/or unauthorized third parties; and again: extraordinary events such as accidents, non-ordinary deterioration of the Product or its components, caused, by way of example, by the physical, electrical or electromagnetic environment. In particular, it is specified that the CUSTOMER will be exclusively responsible for the use of the Products in machinery, for activities and applications other than those specifically indicated in the ESEA Technical Documentation and for all possible consequences.

VII) Except in cases of wilful misconduct and gross negligence, any further liability of ESEA, whether contractual or non-contractual, direct or indirect, is therefore excluded, in addition to that in any case originating from manufacturing or operating defects of the Product, such as - by way of example and not limited to - compensation, indemnity, reimbursement and any other form of economic compensation, for damages, losses (including profits), costs, expenses (including those relating to any withdrawal of the Product from the market), loss of profit, interruption of the operation of the Product, limiting its liability to the payment of a sum that never exceeds the price of the Product.

VIII) In the event that the CUSTOMER finds defects and/or malfunctions, as well as missing or incorrect components with respect to what is provided for in the product specifications, he/she will send ESEA an appropriate complaint report, indicating all the correct references (order and/or delivery note) and the details of the problem within a maximum of 15 (ten) days from delivery (regardless of the actual installation and/or testing carried out by the CUSTOMER). Any complaints received after the deadline indicated above may, at ESEA's discretion, not be taken into consideration.

IX) Unless expressly agreed, ESEA does not require maintenance of the product and/or assistance in its operation and/or training for its use. Assistance may be provided at the discretion of ESEA and subject to the acceptance of the related costs (including any travel) by the CUSTOMER.

X) ESEA is not responsible, as sent and/or received under Subcontracting, for defects resulting from misuse, poor storage, incorrect handling and maintenance, and/or storage in conflict with written recommendations and suggestions provided by the Company or as a result of use, handling and storage that is manifestly fallacious. In addition, the Company is not responsible for defects resulting from vandalism or force majeure.

XI) ESEA is not responsible for "late delivery", nor liable to penalties if the Product has been delivered and/or shipped within the deadline for delivery of the same, in any case there is a deductible of 7 (seven) working days relating to delivery and/or shipment.

XII) The obligation to repair or replace the Products replaces any other warranty or legal liability with the exclusion of any other liability of the Seller (contractual or non-contractual, express or implied) that may in any case arise from or in relation to the Products supplied (e.g. compensation for damages, loss of profit, recall campaigns, etc.).

XII) ESEA's liability is limited to providing only the replacement of a defective part, with the installation of the same, and there shall be no further liability or claim against the Contractor. In the event that Contractor is required to assemble or start the Machinery, Contractor shall ensure that any field supervision work performed by Contractor shall be performed in a working and conscientious manner. The contractor's obligation under this warranty is limited to correcting, at the place of installation, defects resulting from the non-working installation of the machinery, provided that the purchaser notifies the contractor in writing within fifteen (15) days of the purchaser's first knowledge and within one year of the date of initial start-up of the machinery. 


XIII) The contractor makes no warranty with respect to parts or materials manufactured by third parties, which are delivered to the buyer under this contract. The purchaser shall be limited to the separate warranties offered by such manufacturers, if any.

THE WARRANTIES LISTED HEREIN ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AND IN LIEU OF ANY OTHER OBLIGATION OR LIABILITY FOR CONSEQUENTIAL, LOSS OR DAMAGE. CONTACTOR MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED, OR STATUTORY, AND HAS NOT AUTHORIZED ANYONE TO ASSUME ON ITS BEHALF ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THE SALE OR INSTALLATION OF THE EQUIPMENT, EXCEPT AS SPECIFICALLY SET FORTH HEREIN.

INTELLECTUAL PROPERTY OF THE PRODUCT AND RELATED DRAWINGS AND TECHNICAL DOCUMENTS

A) Unless otherwise agreed, the Technical Documentation, all drawings, documents and technical specifications, illustrations and information relating to the Products and/or services covered by the contract (delivered and made available to the CUSTOMER or vice versa) may not be used, unless expressly authorized by the Disclosing party, except for the purposes for which they were delivered and, by way of example, for its installation, use, disclosure, engineering, maintenance and marketing.

B) All information (in whatever form and format provided), technical standards, specifications exchanged between the parties, are presumed to be the exclusive property of the Party that provided them to the other. No license to trademark or exploit patents, or other industrial or intellectual property rights, relating to the aforementioned technical information, know-how, etc., is intended to be granted to the Receiving Party with this Agreement.

C) The parties undertake to safeguard each other's commercial monopoly rights and will immediately bring to the attention of the other any improper or unlawful use of patents, trademarks, emblems, designs, models or other industrial or commercial monopoly rights of the Company of which it becomes aware.

D) Unless otherwise agreed, to the extent ESEA creates or contributes to any development of the Project in the performance of this Agreement, ESEA assigns to the CUSTOMER all right, title and interest in such Project. ESEA will not use, reproduce, disclose or provide any part of the intellectual property of the Project to any third party, except as necessary to perform work on behalf of CUSTOMER under this Agreement, and only with CUSTOMER's prior written consent.

E) These obligations are reciprocal in the contractual context, meaning "Receiving Party" who receives information and so on and "Disclosing Party" who provides information and so on.

INTELLECTUAL PROPERTY BACKGROUND

G) ESEA retains ownership of any intellectual property, know-how, processes, technologies or materials developed by ESEA prior to the effective date of this Agreement, or independently developed outside the scope of the project. Nothing in this Agreement transfers ownership of such Background to CUSTOMER. However, ESEA grants the CUSTOMER a non-exclusive, royalty-free, perpetual license to use any background elements of ESEA that are inevitably incorporated into the Project, solely for use, maintenance and future development.

H) PHOTOGRAPHS: The buyer requires written consent before any photographs are used externally, including for promotional purposes. Photographs must not reveal proprietary manufacturing processes, layouts, or pieces of work. 


FORCE MAJEURE

A) ESEA is not responsible for the event of delay or non-fulfilment of its contractual obligations, if the delay or non-fulfilment is due to causes beyond its control, such as, but not limited to, natural disasters, wars, embargoes, requisitions, supervening legislation, strikes, production stoppages, difficulties in finding raw materials and other components essential to the production system, machinery failures or power outages.

B) ESEA is exempt from liability for any loss, damage or delay due to causes beyond its control, including but not limited to delays caused by acts or omissions of the Buyer, accidents, utility failures, fires, floods, patent infringements, strikes, blockades, wars, acts of God, civil or military authority, insurrection, riots, civil unrest or natural government instructions, state or local orders, or directions, or delays from customers.

C) All periods and dates by which ESEA is required to perform any act or thing hereunder shall be extended by the number of days in which the Contractor is delayed in performance due to any of the causes mentioned above. The Contractor shall not be liable for any damage or loss that may be caused to the Machinery or equipment or surrounding buildings, caused directly or indirectly by the operation of the Machinery at different speeds, temperatures or production cycles than those specified, or with solvents, materials or products other than those specifically covered by the Design Limits of the Machinery or through operation by unqualified operators. Operation of the Machinery under conditions or for functions other than those specifically covered by the Machinery Design Limits or Contractor's specifications is entirely at Buyer's sole risk.

QUALITY OF PRODUCTS AND PROCESSES/ CERTIFICATIONS

A) ESEA's quality management system is certified in accordance with the purpose indicated in the certifications held and designed and manufactured according to current European regulations. Each Product is also designed and verified to comply with the limits imposed by applicable European and international standards for compatibility. In addition, many ESEA Products are tested and certified by international certification bodies (any certification mark is visible on the product identification label).

B) ESEA will maintain full traceability for all materials used in production, including carbon fiber, resin systems, adhesives, liners, metal inserts and consumables. ESEA will retain all material certificates, batch records and supplier documentation for a minimum of five (5) years and will provide copies of any relevant certificates or traceability documents to the CUSTOMER upon request.

PRIVACY AND GDPR

A) With regard to the processing of Personal Data, ESEA and the CUSTOMER will act mutually as Data Controllers for the purpose of carrying out the services agreed in this Agreement and will be responsible for the processing of the Personal Data covered by the same. The terms "processing", "controller" and "Personal Data" are to be understood as defined by Regulation (EU) 679/2016 of the European Parliament and of the Council of 27 April 2016 on the protection of natural persons with regard to the processing of personal data and on the free movement of such data (also "Regulation"). The parties guarantee the reciprocal processing of Data in compliance with the obligations deriving from the applicable data protection legislation, including the Regulation and that they will implement appropriate technical and organizational measures to protect the Data from any unlawful or unauthorized processing as well as from accidental loss, destruction, damage, alteration or disclosure.


CODE OF ETHICS, ORGANIZATIONAL MODEL PURSUANT TO LEGISLATIVE DECREE NO. 231/01 AND ANTI-CORRUPTION PROCEDURE

A) If already present and published on the ESEA website at the time of acceptance of these general conditions, the CUSTOMER undertakes to read the Company's Code of Ethics, the Organization and Management Model pursuant to Legislative Decree 231/01. To the senses and for the effects of art. 1381 of the Italian Civil Code, the CUSTOMER undertakes to ensure that top management personnel and subordinate employees comply with the principles and values contained in ESEA's Code of Ethics and to act in line with ESEA's Organizational Model pursuant to Legislative Decree 231/01 and the related Anti-Corruption Procedure. The CUSTOMER undertakes to ensure that any other conduct is in any case such as not to expose ESEA to the risk of applying the sanctions provided for by Legislative Decree no. 231/01. Any violation of the rules provided for in the aforementioned rules and procedures will constitute a serious violation of these conditions and ESEA will be entitled to be indemnified by the CUSTOMER for any sanctions or damages that may arise from the latter as a result of the violation of the same by the CUSTOMER, its top management personnel or subordinate employees.

CONFIDENTIALITY AND CONFIDENTIALITY

A) The parties undertake to each other not to disclose, disclose or make available for inspection by unauthorized or untitled third parties, any information, documentation and details relating to the contract, as well as the design and construction of the Products and/or provision of Services, including technical information or other Intellectual Property other than that reasonably necessary to be disclosed to any subcontractors in the normal course of the day-to-day of the activity.

B) The parties shall ensure that their personnel and subcontractors, where such information is disclosed, enter into a Non-Disclosure Agreement in the form required and provided by the Company and shall fulfill and comply with such obligations. They also undertake not to use the Intellectual Property to the detriment of their respective Companies or for the benefit of any other person, company, partnership or company, nor will they otherwise misuse or disclose the same.

CONDITIONS OF TERMINATION OF THE AGREEMENT

A) ESEA shall be entitled at any time, by giving appropriate written notice (by Registered Mail or Certified Electronic Mail) to immediately terminate this Agreement in the event of any of the following events:

I. BREACH – if either Party commits a breach of any of the terms or conditions of this Agreement;

II. FAILURE TO COMPLY WITH PAYMENT TERMS - if the CUSTOMER for any reason delays and/or does not fulfill payments as contractually established;

III. INABILITY TO PERFORM ITS OBLIGATIONS - if for any reason a Party is unable to fulfill its contractual obligations for a period of 30 working days, even if not consecutive, accumulating delays for such period;

IV. FAIR PRACTICES and ACTS OF UNFAIR COMPETITION - when a Party is guilty of a specific practice or act of unfair competition that is detrimental to its interests and reputation; in such a case, it is up to the Party raising the issue to challenge and prove the detrimental conduct of the offending Party;

V. INSOLVENCY PROCEEDINGS – if either Party becomes insolvent or commences or files proceedings to obtain an order under bankruptcy law or is placed under receivership or commences a dissolution or liquidation of its assets or a transfer for the benefit of its creditors or a judgment is issued declaring the other Party bankrupt or ceasing to operate;

VI. BREACH OF CONFIDENTIALITY RULES - if a Party violates the confidentiality rules set forth within this Agreement by disclosing Proprietary and/or Confidential Information; in such a case, it is for the Party raising the issue to prove the conduct of the Party guilty of such violation; 


VII. CAUSES OF FORCE MAJEURE AND/OR SUPERVENING EXCESSIVE BURDENSOMENESS - if there are unforeseeable and extraordinary events that make the service impossible or excessively expensive;

B) Before any resolution, the non-defaulting party must formalize the objections to the other party, giving a reasonable deadline to remedy the situation if possible. In any case, the parties undertake to make a serious attempt to resolve the problems in good faith and at a managerial level.

C) In the event of termination due to the CUSTOMER, ESEA shall be entitled to payment for the works already completed and/or materials already ordered. For partially completed Products, it is understood that the value of such Products will be calculated on the basis of progress on the basis of the contract price increased by 20%. Except for further expenses and damages that can be compensated (if any) within the limits of the value of the contract.

D) In the event of termination due to ESEA, the CUSTOMER will be entitled to receive the works already completed and/or materials already ordered and the refund of the sums paid if they exceed the works and/or materials that ESEA will deliver. Except for further expenses and damages that can be compensated (if any) within the limits of the value of the contract, or of the individual processing phase and/or step and/or lot if any.

E) Both Parties have the right at any time to terminate this Agreement for good cause by giving three (3) calendar months' written notice to the other Party, by registered mail or certified email with proof of receipt from the addressee. In this case, the mechanisms identified above for resolution are applied.

F) This is without prejudice to the provisions provided for in one of the scenarios referred to in the following paragraphs:

I. If, at any time, either Party is in breach of the terms of the Agreement and the person responsible for fault fails to remedy such breach to the reasonable satisfaction of the other (injured) Party, within the time required for remedy contained in the notice by either Party specifying such breach, the "injured" Party may terminate this Agreement by giving immediate notice of termination to the breaching Party. The provisions of this paragraph shall be in addition to any other legal act which the non-defaulting Party may perform in respect of the other Party.

II. This Agreement shall terminate with immediate effect, upon notice by either Party, in the event that a judgment is issued declaring the bankruptcy, insolvency, Business Crisis of the other Party or a receiver is appointed, or in the event that proceedings are commenced in such case that have not been annulled within ninety (90) days.

III. Termination of this Agreement for any reason shall not affect the obligations and commitments set forth in this Agreement and, in particular, mutual obligations and commitments or any obligation which, in the context of this Agreement, is intended to continue and survive its termination.

IV. Upon termination of this Agreement, the Receiving Party will immediately cease using, and will return to the Proposing Party, the Proprietary Information disclosed for the purposes of this Agreement (including samples and/or prototypes of any kind).

GOVERNING LAW

A) For commercial transactions carried out in Italy, these General Terms and Conditions are subject to Italian law. Where commercial transactions are carried out in countries other than Italy, if Italian law does not apply, the rules of private international law on sales may apply. However, the application to this Contract of the United Nations Convention on Contracts for the International Sale of Goods, adopted in Vienna on 11 April 1980, is expressly excluded.

B) If differences, controversies or disputes arise between the Parties (arising out of or in connection with the proper performance of this Agreement), the Parties shall use reasonable efforts to resolve the Dispute through negotiations in good faith. In the event that the Parties do not reach an agreement following the negotiations carried out for an amicable solution, after 30 (thirty) calendar days from the start of the negotiations, each Party may optionally submit the Dispute to mediation and/or assisted negotiation (or other conciliation procedures), as well as to binding Arbitration (including for technical issues) pursuant to the Chamber of Commerce Conciliation and Arbitration Rules. An arbitrator shall be appointed by the President of the Offices of the Chamber of Commerce of Chieti/Pescara (ITALY), as the designated seat for arbitration, in accordance with the aforementioned Rules. Neither party shall be prevented or delayed from seeking a preliminary injunction or other judicial order, including precautionary measures, at any time if, in its judgment, such action is necessary to prevent irreparable harm.


C) In the event of legal disputes, the exclusive jurisdiction is that of Pescara (PE) ITALY, to be understood also as the place where the obligation arose and/or must be performed, and the contract and the related obligations were signed.

MISCELLANEOUS

A) In the event of termination of this Agreement for any cause or at any time prior to its natural termination, at the request of the Disclosing Party, the Receiving Party shall promptly return to the Disclosing Party, or otherwise dispose of as may be the case with the Disclosing Party, any and all Proprietary Information and any information transmitted to the Receiving Party relating to this Agreement (including correspondence between the Parties) that may have in in accordance with the purpose of the Agreement.

B) In the event of termination, the Receiving Party shall immediately deliver to the Disclosing Party, or otherwise arrange for the redelivery of any samples of the Products and/or Prototypes received from the Disclosing Party and any information and/or data owned by the Disclosing Party that the Receiving Party may have in its possession or control.

C) Any notice and/or notice to be given under this Agreement shall be deemed to have been sufficiently given to any Party if forwarded by registered mail to its usual place of business or last known place of business or by Certified Electronic Mail and shall be deemed to have been sufficiently delivered to the Party if forwarded similarly to its registered office where it is located within its country.

D) Nothing in this Agreement shall mean that the Parties will work together or that they will be directed to form a company, joint venture, partnership, agency, or any legal entity between the Parties. In addition, nothing in this Agreement is intended to grant either Party the power to enter into commitments of any kind to third parties and/or to incur a debt to third parties and/or to communicate with third parties, for or on behalf of the other Party and/or to represent such other Party.

E) If any clause and/or paragraph of the Agreement is void and/or invalid, such provision shall be ineffective to the extent that its invalidity does not affect the validity of the remaining provisions hereof.

F) The Parties to this Framework Agreement agree and represent that they are legally constituted companies, duly organized and existing under their respective laws, and that they have full authority to observe and perform their respective responsibilities under this Agreement, that nothing herein shall conflict with the provisions of their articles of association or any agreement or undertaking entered into by them, that the execution and validity of this Agreement on their behalf have been duly authorized.

G) These Terms and Conditions have been drafted in Italian and translated into English. In the event of discrepancy or inconsistency between the Italian text and the English translation, the Italian text shall prevail. Any difficulties or uncertainties in the interpretation that may arise will be resolved exclusively with reference to this text. 


H) The parties shall provide each other with certifications or certificates attesting to civil liability insurance and compliance with the laws on accidents at work, when reasonably required in fulfillment or execution of this contract.

I) Tis Framework Supply Agreement consists of 13 (thirteen) pages, excluding any ATTACHMENTS, read, understood, accepted and duly countersigned by both Parties, also in digital format.

For ratification and approval:

Date : 17th March 2026

Location: Cepagatti (PE)

QNETIC CORPORATION   ESEA COMPOSITES SRL
Loic Bastard CTO    
 


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 1 Approved by: Michael Pratt

 

 

 

PULSAR ROTOR TECHNICAL SPECIFICATIONS

This document intent to be as complete as possible for the supplier to quote the manufacturing of the rotor for the Pulsar pilot of Qnetic Corporation.

 

 

 

 

 


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 2 Approved by: Michael Pratt

1. TABLE OF CONTENT

1. TABLE OF CONTENT 2
2. REVISION TABLE 4
3. QUALITY GATES 5
4. SYSTEM DESCRIPTION 6
5. SCOPE OF WORK 7
 5.1. First Rotor (First Article) Proposal 7
 5.2. Tooling Work Package (quoted separately) 7
 5.3. Small batch Quotation (quoted separately) 8
6. ROTOR GENERAL DIMENSIONS AND STRUCTURE 9
7. ROTOR COMPONENTS AND SUB ASSEMBLIES 12
 7.1. Hub sub-assemblies 12
 7.2. Compression Shaft 13
 7.3. Precore Joining Ring 13
 7.1. Final Wound Rotor 13
8. MATERIALS AND TESTING REQUIREMENTS 14
 8.1. Hub sub-assemblies 14
 8.1. All filament wound parts 14
 8.1.1. Fiber 14
 8.1.2. Resin 15
 8.1.3. Composite system 15
9. PRODUCTION PROCESS 17
 9.1. Mandrel and Hubs Assembly 17
 9.1.1. STEP 1 : Hub Sub-Assemblies 17
 9.1.2. STEP 2: On to Mandrel 18
 9.1.3. STEP 3: Extension Shaft and Kart 20
 9.1.4. STEP 4: Wax and Mold Release 21
 9.2. Precore winding and cutting 21
 9.2.1. STEP 1: Preparation and alignment 21
 9.2.2. STEP 2: EPDM liner 22
 9.2.3. STEP 3: Precore Winding 22
 9.2.4. STEP 4: Curing 23
 9.2.5. STEP 5: Cutting and removal of the mandrel 23
 9.3. Precore assembly back together 24
 9.3.1. STEP 1: Vertical positioning 24
 9.3.2. STEP 2: Precore Joining Ring 24
 9.3.3. STEP 3: Compression Shaft 25
 9.3.4. STEP 4: Curing time 26
 9.3.5. STEP 5: Vertical assembly of the Precore second half 26
 9.3.6. STEP 7: Inject Adhesive 27


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 3 Approved by: Michael Pratt

 9.3.7. STEP 8: Curing Time 27
 9.4. Overwinding 27
10. FILAMENT WINDING LAMINATE 30
11. QUALITY ASSURANCE CONCEPT AND QUALITY GATES 32
 11.1. Definitions 32
 11.1.1. Control/inspection/review responsibilities levels  32
 11.1.2. Check type 32
 11.2. Tooling Qualification 32
 11.2.1. Tooling for Composite Hub Discs (if needed)  32
 11.2.2. Tooling for Compression Shaft 32
 11.2.3. Tooling for Precore Joining Ring 32
 11.2.4. Tooling for Vertical assembly 32
 11.2.5. Transportation Crate 32
 11.2.6. Manufacturing Karts 33
 11.2.7. Tooling for Precore 33
 11.3. Rotor - Hub Sub-Assemblies, Compression Shaft, and Precore Joining Ring 33
 11.3.1. Hub Metal parts  33
 11.3.2. Composite Hub Discs Material 33
 11.3.3. Compression Shaft  34
 11.3.4. Joining Ring  35
 11.4. Precore 37
 11.4.1. Mandrel preparation 37
 11.4.2. Apply Elastomer Liner on Composite parts  37
 11.4.3. Winding  37
 11.4.4. Post-curing  38
 11.4.5. Cutting  38
 11.4.6. Demolding 38
 11.4.7. Joining with Compression Shaft  39
 11.5. Overwinding  39
 11.5.1. Winding 39
 11.5.2. Post-curing 40
 11.5.3. Demolding 40
 11.6. Transportation conditioning. 41
 11.6.1. Assembly of Metal Shafts and Balancing Discs 41
12. ACCEPTANCE CRITERIA 42
 12.1. Geometrical Tolerance: 42
 12.2. Bolt Pretention 42
 12.3. Bounded parts 42
 12.4. Total Rotor Weight 42
 12.5. Total Rotor Length 42
 12.6. Quality Gates 42


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 4 Approved by: Michael Pratt

2. REVISION TABLE

Rev. Change Description Date Change by Approved by
03 Add a revision table
Update dimension of wound rotor
2025-03-06 J. Zhu L. Bastard
04 Update Rotor geometry, build and supplier requirements based on the updated design 2025-07-03 L. Bastard [unapproved draft]
05 Update rotor design, update winding angles and pattern, update tolerances, update
tooling concept
2025-09-03 L. Bastard [unapproved draft]
06 Minor edits, updated rotor length 2025-09-10 M. Pratt L. Bastard
07 Simplified Rotor Geometry 2025-10-13 L. Bastard [unreleased
draft]
08 Addition of assembly process, Quality gates
and manufacturing drawing references
2025-11-26 0. Fischer
L. Bastard
[unreleased
draft]
09 Re-0rganization of the document, various
edits.
2025-12-04 M. Mier
L. Bastard
M. Pratt
09 Edits after supplier visit 2025-12-15 L. Bastard  

 


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 5 Approved by: Michael Pratt

3. QUALITY GATES

QUALITY GATE 1-Drawings Sign Off. 32
QUALITY GATE 2: Approve Tooling for production - Sign Off 33
QUALITY GATE 3: Approve Composite Hub Discs - pre-fabricated plates 33
QUALITY GATE 4: Approve Composite Hub Discs - Laminate Stack 34
QUALITY GATE 5: Approve Composite Hub Discs - Sign Off 34
QUALITY GATE 6: Compression Shaft - Approve Curing Steps 35
QUALITY GATE 7: Compression Shaft - Approve Laminate for Machining. 35
QUALITY GATE 8: Compression Shaft - Sign Off 35
QUALITY GATE 9: Precore Joining Ring - Sign Off 36
QUALITY GATE 10: Mandrel Preparation - Hub Sub Assemblies 37
QUALITY GATE 11: Mandrel Preparation - Alignment verification 37
QUALITY GATE 12: Mandrel Preparation - Elastomer Liner protocol 37
QUALITY GATE 13: Precore - Approve Curing Protocol 38
QUALITY GATE 14: Precore - Sign-Off for assembly 38
QUALITY GATE 15: Precore - Sign-Off for overwinding 39
QUALITY GATE 16: Overwinding - Alignment verification 39
QUALITY GATE 17: Overwinding - approve cure protocol 40
QUALITY GATE 18: Overwinding - Rotor Sign Off 40
QUALITY GATE 19: Transportation - Rotor Conditioning for Balancing Sign Off 41


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 6 Approved by: Michael Pratt

4. SYSTEM DESCRIPTION

Pulsar is the first pilot of an innovative FESS (Flywheel Energy Storage System) designed by Qnetic Corporation for grid-scale applications.

Pulsar is composed of the following subsystems:

  • A rotor spinning in a vacuum and mounted vertically.
  • A permanent magnet suspension bearing that takes the gravity loads.
  • A set of different bearings that guides the system radially.
  • A generator-motor.
  • A vacuum-sealed housing.
  • Auxiliary systems (vacuum pump, cooling, control, etc.)

Figure 1: Illustration of Pulsar installed in the field, for illustration only-rotor and other parts are not necessarily representing the manufacturing design.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 7 Approved by: Michael Pratt

5. SCOPE OF WORK

This specification pertains to the manufacture of four rotors for Qnetic in 2025/26. Items highlighted in yellow will be discussed and agreed upon with the supplier as part of the scope of work.

5.1. First Rotor (First Article) Proposal

Based on the information provided in this document, we would like the supplier to provide a technical and commercial proposal, covering the following points:

1. Technical clarification 

a. Provide feedback on the current rotor design and manufacturability, e.g.: Confirm the rotor manufacturability (machine capability, tooling, composite thickness, etc.)

b. Comments on the proposed manufacturing process

c. Confirm (or provide an alternative proposal for) the alignment methods

d. Provide a QC-concept with reference to chap. 9

e. Define the critical manufacturing processes, especially the proposed curing process (in-process curing or step-by-step oven curing). List required information needed from Qnetic

Based on a final technical clarification:

2. Provide a quotation (technical and commercial proposal) for one complete rotor manufactured as "First Article"

5.2. Tooling Work Package (quoted with first article)

Technical & commercial proposal for tooling for the manufacturing with reference to manufacturing description in this document.

Below a non-exhaustive list of tooling not provided by Qnetic. Extension shaft to the winding machine

  • Winding cart
  • CF laminate tooling
  • Compression shaft mandrel
  • Compression shaft extraction tool
  • Precore joining ring mandrel
  • Rotor support for vertical assembly of precore
  • Shipping crate

Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 8 Approved by: Michael Pratt

5.3. Small batch Quotation (quoted separately)

Technical & commercial proposal (including lead time and cost breakdown) for an initial small batch production. This should include:

a. Manufacturing of the 3 rotors (#2 to #4) as initial small batch

b. Material cost (if not supplied by Qnetic)

c. Test and Inspection campaign


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 9 Approved by: Michael Pratt

6. ROTOR GENERAL DIMENSIONS AND STRUCTURE

GENERAL DIMENSION PULSAR ROTOR
Estimated External Diameter [mm] 1,600 mm
Internal Diameter [mm] 1,200 mm
Estimated wall Thickness [mm]
NB-this shall be ultimately driven by the rotor mass target
200 ±10 (loose constraint)
Total Length [mm] 3285±1(hard constraint)
Total Rotor Mass [kg] (Composite + Hub Sub-Assemblies) 4,500 ±10kg (hard constraint)
Maximum Inertia along rotation axis [kg · m2] 1,800 (input for winding machine)

Figure 2: Representation of the rotor for illustration purposes. Do not rely on this data-refer only to revision-controlled drawings and their 3D CAD counterparts.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 10 Approved by: Michael Pratt

Pulsar part overview
Item Qnetic Part Number Name Material QTY.
0 P0I-S06 WOUND ROTOR SEE BOM I
I P0I-P0I9 ROTOR METAL HUB 30CrNiMo8 2
 
2
P0I-P093
[also part #
25070-0I

25070-02]
 
COMPRESSION SHAFT
 
Carbon Fiber
 
I
3 P0I-P094 ROTOR CF HUB Carbon Fiber 2
4 P0I-P095 ROTOR CF OVERWIND Carbon Fiber I
5 P0I-P098 ROTOR METAL HUB INSIDE 30CrNiMo8 2
6 P0I-P096 ROTOR HOLLOW BOLT Ti6Al4V 24
7 P0I-F00I M24 NUT ISO 4034 Steel 24
 
8
P0I-PI05
[also part #
25070-I0]
 
PRECORE JOINING RING
 
Glass Fiber
 
I
9 P0I-P089 ROTOR WIND METAL MANDREL SEE BOM I
9.I P0I-P09I ROTOR MANDREL CYLINDER Q235 I
9.2 P0I-P090 ROTOR MANDREL BULKHEAD Q235 2
9.3 P0I-P092 ROTOR MANDREL END CURVE Q235 2
9.4 P0I-P097 ROTOR MANDREL END PLATE Q235 2
9.4.I P0I-P099 ROTOR MANDREL END EXTRA RING Q235 2
I0 P0I-C022 FULL THREAD BOLT MI6 S45C I2
II P0I-F003 MI6 WASHER ISO 7094 Steel I2
I2 P0I-F002 MI6 NUT ISO 4034 Steel I2


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 11 Approved by: Michael Pratt

Figure 3: Parts number and name of the components constituting the rotor assembly


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 12 Approved by: Michael Pratt

7. ROTOR COMPONENTS AND SUB ASSEMBLIES

7.1. Hub sub-assemblies

Qnetic will provide the metal hub elements, part numbers:

  • P01-P019 R0T0R METAL HUB - See Drawing P01-P019-R0T0R METAL HUB-REV 02.pdf
  • P01-P098 R0T0R METAL HUB INSIDE - See Drawing P01-P098-R0T0R METAL HUB INSIDE-REV 02.pdf
  • P01-096 R0T0R H0LL0W B0LT - See Drawing P01-P096-R0T0R H0LL0W B0LT-REV 02.pdf
  • P01-C016 M24 NUT - Standard Part
  • M16 WASHER IS0 7094 - Standard Part

The supplier will manufacture the following part number

  • P01-P094 R0T0R CF HUB- See Drawing P01-P094-R0T0R CF HUB-REV 02.pdf

The supplier is responsible for the assembly of the Hub sub-assemblies.

Figure 4: Hub Sub-assembly cross-section representation when assembled (material appearance rendering applied must be ignored)


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 13 Approved by: Michael Pratt

7.2. Compression Shaft

The supplier will manufacture this part using filament winding according to drawing 25070-01 Compression Shaft Winding Rev01.pdf. The machining will be executed according to drawing 25070-02 Compression Shaft Machining Rev01.pdf.

Figure 5: Representation of the Compression Shaft

7.3. Precore Joining Ring

The supplier will manufacture this part using filament winding and machining according to Drawing 25070-10 Precore Joining Ring Rev01.pdf.

Figure 6: Representation of the Precore Joining Ring

The Precore Joining Ring is to be made from glass fiber, not carbon fiber.

7.4. Final Wound Rotor

The supplier will assemble all the subassembly together and execute the final overwinding according to drawing P01-S06-W0UND R0T0R-REV 06.pdf


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 14 Approved by: Michael Pratt

Figure 7: Representation of the fully assembled rotor including the compression shaft in the middle and the Precore Joining Ring (material appearance rendering must be ignored).

8. MATERIALS AND TESTING REQUIREMENTS

8.1. Hub sub-assemblies

The Part P01-P094 R0T0R CF HUB is made of laminated plates using Prepreg UD T700 carbon fiber (or equivalent) stacked in a quasi-isotropic pattern with lay-up symmetric to the mid-plane. The plate could be made based on prefabricated thin plates glued together with adhesive.

The sourcing of the plates is responsibility of the supplier. The details of the laminate plate used (Reference, composition, price) will be communicated to Qnetic for review.

8.1. All filament wound parts

8.1.1. Fiber

The fiber used for the manufacturing of all the filament wound parts is T700S 24K or equivalent. The fiber will be sourced and supplied by Qnetic.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 15 Approved by: Michael Pratt

8.1.2. Resin

Ideally the resin system used for the manufacturing of all the filament part is an epoxy resin toughened with elastomer.

The resin elastic modulus is in the range of 3.3e5psi or 2250MPa. It also presents high elongation at break.

The supplier will propose the resin system to be used and provide the mechanical properties of the resin system to Qnetic for review and approval.

The resin data to be provided shall include:

  • Density
  • Tensile modulus
  • Shear modulus
  • Poisson's ratio
  • Tensile strength
  • Compression strength
  • Shear strength

8.1.3. Composite system

The composite (combination of fiber + resin) shall be tested according to (1 time only) :

  • ASTM D3039 - Tensile Properties of Polymer Matrix Composites ASTM D3846 - In-Plane Shear Strength of Reinforced Plastics
  • (ASTM D695 - Compressive Properties of Rigid Plastics)
  • ASTM D6641 - Compressive Properties of Polymer Matrix Composites

The composite data provided shall include:

  • the complete stress-strain curves for:
    • the shear behavior
    • the normal stress-strain behavior
  • Modulus and max strength in the fiber and perpendicular to the fiber, tension and compression
  • Modulus and max strength in shear
  • Density
  • Fiber volume ratio

Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 16 Approved by: Michael Pratt

Category Parameter ASTM Test Required?
Elastic E₁, E₂, (E₃)* D3039; D6641  
  G₁₂ D3518  
  G₂₃, G₁₃ D5379 or estimated optional
  ν₁₂ D3039 (strain)  
  ν₂₃, ν₁₃ estimate optional
Nonlinear
curves
σ-ε (0° T & C) D3039, D6641  
  σ-ε (90° T & C) D3039, D6641  
  τ-γ shear D3518  
Strengths
(FF)
  D3039 0°, D6641 0°  
Strengths
(IFF)
  D3039 90°, D6641 90°  
  S₁₂ D3518  
  S₂₃ (ILSS) D2344  
Interlaminar GIc, GIIc D5528, D7905 optional
Physical ρ D792  
  Vf D3171  
  CTE E831 optional
  Tg D3418 recommended


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 17 Approved by: Michael Pratt

9. PRODUCTION PROCESS

9.1. Mandrel and Hubs Assembly

Will be supplied by Qnetic:

  • P01-P019 R0T0R METAL HUB - See Drawing P01-P019-R0T0R METAL HUB-REV 02.pdf
  • P01-P098 R0T0R METAL HUB INSIDE - See Drawing P01-P098-R0T0R METAL HUB INSIDE-REV 02.pdf
  • P01-096 R0T0R H0LL0W B0LT - See Drawing P01-P096-R0T0R H0LL0W B0LT-REV 02.pdf
  • P01-C016 M24 NUT - Standard Part
  • M16 WASHER IS0 7094 - Standard Part
  • Alignment pin
  • Mandrel connecting bolts

Will be supplied by Supplier:

  • P01-P094 R0T0R CF HUB- See Drawing P01-P094-R0T0R CF HUB-REV 02.pdf

The supplier will assemble the hub sub-assemblies to the metal mandrel to create the final tooling for the winding of the Precore.

9.1.1. STEP 1 : Hub Sub-Assemblies

Assemble the Hub Sub-Assemblies with six bolts each spaced with an empty hole in between. See following illustrations: 


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 18 Approved by: Michael Pratt

Figure 8: Hub Sub-assembly connection (material appearance rendering must be ignored)

The Bolt pretention process is described below:

The tightening process and torque are described below:

  • Manual Torque Wrench (or any method that's more accurate)
  • Tightening torque : 725Nm
  • Lubricant on thread : M0LYK0TE G-Rapid Plus Paste from DUP0NT

9.1.2. STEP 2: 0n to Mandrel

Assemble the Hub-Subassemblies to the Mandrel as illustrated below:


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 19 Approved by: Michael Pratt

Figure 9: Hub Sub-assembly connection to the metal mandrel

The mandrel assembly should look like the following illustrations.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 20 Approved by: Michael Pratt

Figure 1O: Illustration of the hub sub-assemblies mounted on the mandrel

9.1.3. STEP 3: Extension Shaft and Kart

Assemble the extension shafts to connect to the winding machine and Position the mandrel assembly on the manufacturing cart to support the rotor.

The extension shafts and the cart are provided by the supplier.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 21 Approved by: Michael Pratt

 

Figure 11: Illustration of the shaft extensions and the winding cart

The cart function is to ensure the correct alignment of the shaft extensions on both sides of the rotor.

9.1.4. STEP 4: Wax and Mold Release

Apply wax and then mold release on the metal part of the mandrel (not on the composite parts) + heating (depends on system used at supplier).

9.2. Precore winding and cutting

9.2.1. STEP 1: Preparation and alignment

After assembly the mandrel is mounted positioned on the winding machine. Both shafts are measured against total runout and axial alignment. See table below.


Global tolerances for the Mandrel assembly

Total run out ±5 thou = ±0.127mm
Axial alignment tolerance between the 2 hubs: ±2 thou = ±0.05mm.

Cart design and alignment methods on supplier to define.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 22 Approved by: Michael Pratt

9.2.2. STEP 2: EPDM liner

0n the mandrel assembly a 1mm thick layer of unvulcanized EPDM rubber liner (between 50 and 70 Shore A) is applied on the external surface of the composite composing the hub sub-assemblies. The rubber should be properly vulcanized and chemically bonded to the composite laminate at least after post-cure.

The supplier will provide a detailed solution in agreement with Qnetic.

Figure 12: Illustration of the unvulcanized rubber liner (red lines) applied on the composite external surface of the composite.

9.2.3. STEP 3: Precore Winding

Wind the first 5 layers (each layer may exist of one or more uni- or bidirectional plies with the same winding angle) of carbon fiber, see winding laminate overview: "Filament Winding Laminate Chapter lO"

Apply peel ply on the entire surface that needs to be overwound later, i.e. the cylinder and part of the dome area.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 23 Approved by: Michael Pratt

Figure 13: Illustration of the first 4 layers wound on the mandrel

9.2.4. STEP 4: Curing

Cure in autoclave or oven, make sure the vulcanization condition of the rubber is coherent with the resin curing cycle. To protect the surface from contamination, do not remove the peel ply until the overwinding begins.

9.2.5. STEP 5: Cutting and removal of the mandrel

  • Cut the precore (composite only, not damaging the mandrel) and remove 25mm of the Precore length.
  • release the thinner bolts linking the hub sub-assemblies to the mandrel; illustration Figure 9
  • Separate the 2 parts of the Precore and remove the mandrel
  • Install and tighten the missing hollow titanium bolts (P01-P096) on both hub assemblies as illustrated on Figure 4.
  • The tightening process and torque are described below:
    • Manual Torque Wrench (or any method that's more accurate)
    • Tightening torque : 725Nm
    • Lubricant on thread : M0LYK0TE G-Rapid Plus Paste from DUP0NT

Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 24 Approved by: Michael Pratt

Figure 14: Illustration of the Precore cutting and mandrel removal (not to scale)

9.3. Precore assembly back together

9.3.1. STEP 1: Vertical positioning.

Position 1 half of the Precore vertically on a support that can hold it safely in place (Support to be designed, could be made of wood.)

Figure 15: Illustration of the vertical assembly of precore with support


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 25 Approved by: Michael Pratt

9.3.2. STEP 2: Precore Joining Ring

Assemble the Precore Joining Ring (drawing 25070-10) in the Precore half (50% overlap) and inject adhesive through previously drilled injection bores into the lower adhesive pocket.

Figure 16: Illustration of the vertical assembly of Precore -Precore Joining Ring

9.3.3. STEP 3: Compression Shaft

Apply adhesive and spacers (e.g. wires) on one face end of the Compression Shaft, bring it in a vertical position, lower it down and position it using shoulder on the P01-P094 R0T0R HUB DISKS.

Make sure the Compression Shaft exhibits the 4 vent holes at one end (see drawing 25070-02).

Figure 17: Illustration of the shoulder on the PO1-PO94 ROTOR HUB DISKS


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 26 Approved by: Michael Pratt

Figure 18: Illustration of the vertical assembly of Precore - Gluing of the Compression Shaft and Precore Joining Ring

9.3.4. STEP 4: Curing time

Allow curing time for the Precore Joining Ring and the Compression Shaft.

9.3.5. STEP 5: Vertical assembly of the Precore second half.

Apply adhesive and spacers on the shaft end - Check glue pressure and risk of spilling.

It is crucial to make sure the compression shaft is in contact. A gap of few millimeters should be observed at the join between the Precore halves.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 27 Approved by: Michael Pratt

Figure 19: Illustration of the vertical assembly of Precore - Assembly of the second half of Precore

9.3.6. STEP 7: Inject Adhesive

Inject adhesive through the previously drilled injection bores into the upper pocket of the Precore Joining Ring.

Fill the gap on the Precore with adhesive.

9.3.7. STEP 8: Curing Time Allow curing time for the adhesive.

9.4. Overwinding

The Overwind is made purely of hoop wound layers. It will require some a bore to guide the fibers. An illustration of the tooling to make that bore if illustrated below.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 28 Approved by: Michael Pratt

Figure 20: Illustration of the tooling to create the bore for overwinding.

The Composite rotor is mounted and positioned on the winding machine. Both side of the shaft are measured against total runout and axial alignment. See table below.


 Global tolerances for the Precore assembly

Total run out ±5 thou = ±0.127mm
Axial alignment tolerance between the 2 hubs: ±2 thou = ±0.05mm.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 29 Approved by: Michael Pratt

Figure 21: Illustration of the rotor winding laminates (not to scale)


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 30 Approved by: Michael Pratt

10. FILAMENT WINDING LAMINATE

Laminate overview 

 

Figure 22: Representation of the laminates build up

Tables with laminate information:

 

Figure 23: Table containing laminate information


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 31 Approved by: Michael Pratt

The Precore laminate is composed of the first 5 layers adding a total thickness of 36mm on the cylinder.

The layers are roughly estimated. The supplier will discretize the layers to a convenient number of sublayers/plies to ensure manufacturability and avoid slippage.

The Supplier will issue the winding programs. The winding patterns will be provided to Qnetic for review and approval.


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 32 Approved by: Michael Pratt

11. QUALITY ASSURANCE CONCEPT AND QUALITY GATES

11.1. Definitions

11.1.1. Control/inspection/review responsibilities levels

L1: 0perator (Self-Check)
L2: Manufacturer QC
L3: Customer Representative (Client Inspector)

11.1.2. Check type

I: In process: L1 or L2; stop only in case on nonconformities

W: Witness: process or inspection witness (monitoring); L3 or L4; stop only in case on nonconformities

H: Hold point: (manufacturing) process stops until approval

Before we start with the tooling, the first step is the have everybody agreeing on the design data.

QUALITY GATE 1-Drawings Sign Off.

11.2. Tooling Qualification

11.2.1. Tooling for Composite Hub Discs (if needed)

ll.2.l.l. Delivery (L2)

• Measure and record planarity, cleanliness - See drawing Reference P01-P094-R0T0R CF HUB-REV 02.pdf

•

11.2.2. Tooling for Compression Shaft

ll.2.2.l. Delivery (L2)

• Measure and record dimensions, roundness, straightness - See drawing Reference 25070-02 Compression Shaft Machining Rev01.pdf

11.2.3. Tooling for Precore Joining Ring

ll.2.3.l. Delivery (L2)

• Measure and record dimensions, roundness, straightness - See drawing Reference 25070-10 Precore Joining Ring Rev01.pdf.

11.2.4. Tooling for Vertical assembly

ll.2.4.l. Delivery (L2)

• Measure and record dimensions, roundness, straightness - See drawing Reference TBD

11.2.5. Transportation Crate

ll.2.5.l. Delivery (L2)

• Measure and record dimensions, roundness, straightness - See drawing Reference TBD


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 33 Approved by: Michael Pratt

11.2.6. Manufacturing Karts

ll.2.6.l. Delivery

• Check available kart(s) for axis alignment (?), weight capacity enhancement feature

11.2.7. Tooling for Precore

ll.2.7.l. Delivery

The Precore mandrel is supplied and approved by Qnetic.

QUALITY GATE 2: Approve Tooling for production - Sign Off

11.3. Rotor - Hub Sub-Assemblies, Compression Shaft, and Precore Joining Ring

11.3.1. Hub Metal parts

ll.3.l.l. Delivery

The Hub metal parts are supplied and approved by Qnetic.

11.3.2. Composite Hub Discs Material

ll.3.2.l. Delivery of pre-fabricated plates

  • check (inspect) plate according to specification (tbd) - Thickness

QUALITY GATE 3: Approve Composite Hub Discs - pre-fabricated plates

ll.3.2.2. Manufacturing process

ll.3.2.2.l. Laminating

  • supply adhesive, check-off adhesive grade - type and lot number

  • check-off plate surface preparation was done according to specified process

  • apply adhesive according to specified process

  • stack plates in a certain sequence

  • check-off checklist for correct stacking sequence (plate by plate)

ll.3.2.2.2. Molding the laminate stack

  • confirm press force, temperature and duration - or vacuum bag

  • start molding process ( or vacuum bag)

ll.3.2.2.3. Demolding

  •  remove laminate from press

  • measure laminate thickness, count layers/compare with 0K sample?


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 34 Approved by: Michael Pratt

QUALITY GATE 4: Approve Composite Hub Discs - Laminate Stack

ll.3.2.2.4. Machining

  • supply approved laminate stack to milling machine

  • check-off milling program revision used

  • start machining

  • Measure and record weight, dimensions and tolerances

  • FFT analyze for quasi-isotropic behavior?

ll.3.2.3. Final Inspection

  • Measure and record dimensions, roundness, straightness - See drawing Reference P01-P094-R0T0R CF HUB-REV 02.pdf

QUALITY GATE 5: Approve Composite Hub Discs - Sign Off

11.3.3. Compression Shaft

ll.3.3.l. Winding

  • supply mold release, check-off mold release grade

  • check-off mandrel was cleaned and inspected

  • check-off mold release was applied

  • supply fibers, resin, reinforcement fabric, check-off material grades

  • assemble and check-off resin bath and delivery eye configuration

  • check and record resin mixture ratio

  • check-off winding program revision used

  • start winding

  • measure and record process parameters (fiber tension, resin and ambient temperature, humidity, resin and fiber consumption,)

  • measure and record layer diameter frequently (after each [hoop] layer)

  • measure and record reinforcement fabric locations

ll.3.3.2. Curing

  • transfer laminate to oven

  • check-off curing program used, start data recording

  • make sure and check-off part is rotating

  • start oven


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 35 Approved by: Michael Pratt

QUALITY GATE 6: Compression Shaft - Approve Curing Steps

ll.3.3.3. Demolding

  • remove shrink film tape from surface

  • mount demolding aperture

  • position mandrel with laminate in demolding machine

  • select and check-off specified demolding gear

  • demold Compression Shaft laminate and lay down on specified support stand

QUALITY GATE 7: Compression Shaft - Approve Laminate for Machining.

ll.3.3.4. Machining

  • cut to length with machining allowance

  • take out sample for DSC analysis and retain samples (tbd)

  • Measure and record dimensions and weight, visual inspection

  • FFT analyze longitudinal modulus

  • take up on lathe, align

  • machine face ends

  • measure and record length, planar run-out

  • perform DSC analysis

ll.3.3.5. Verification

  • Measure and record dimensions, roundness, straightness - See drawing Reference 25070-02 Compression Shaft Machining Rev01.pdf

QUALITY GATE 8: Compression Shaft - Sign Off

11.3.4. Joining Ring

ll.3.4.l. Winding

  • supply mold release, check-off mold release grade

  • check-off mandrel was cleaned and inspected

  • check-off mold release was applied

  • supply fibers, resin, check-off material grades


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 36 Approved by: Michael Pratt
  • assemble and check-off resin bath and delivery eye configuration

  • check and record resin mixture ratio

  • check-off winding program revision used

  • start winding

  • measure and record process parameters (fiber tension, resin and ambient temperature, humidity, resin and fiber consumption)

  • measure and record layer diameter frequently (after each [hoop] layer)

ll.3.4.2. Curing

  • transfer laminate to oven

  • check-off curing program used, start data recording

  • make sure and check-off part is rotating

  • start oven

ll.3.4.3. Demolding

  • remove peel ply from surface

  • if demoulding machine required:

    • mount demolding aperture

    • position mandrel with laminate in demolding machine

    • select and check-off specified demolding gear

  • demold Joining Ring laminate

ll.3.4.4. Machining

  • pre-cut to length with machining allowance

  • check dimensions and weight, visual inspection

  • take up on lathe, align

  • machine contour

ll.3.4.5. Verification

  • check for dimensions, roundness, straightness - See drawing Reference 25070-10 Precore Joining Ring Rev01.pdf.

QUALITY GATE 9: Precore Joining Ring - Sign Off


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 37 Approved by: Michael Pratt

11.4. Precore

11.4.1. Mandrel preparation

  • assemble Hub Sub-Assemblies. See 9.1 Mandrel and Hubs Assembly

QUALITY GATE 1O: Mandrel Preparation - Hub Sub Assemblies

  • assemble approved Hub Subassemblies and Winding Shafts Extensions onto mandrel

  • supply Manufacturing Cart and place mandrel in it

  • supply mold release, check-off mold release grade

  • check-off mandrel was cleaned and inspected

  • apply mold release and check-off mold release was applied

  • if necessary for next step, take up mandrel in winding machine

  • Position and adjust Mandrel according to alignment acceptance criteria:

QUALITY GATE 11: Mandrel Preparation - Alignment verification

11.4.2. Apply Elastomer Liner on Composite parts

  • Apply elastomer liner on the apparent composite parts of the mandrel. The Protocol must be approved by Qnetic.

QUALITY GATE 12: Mandrel Preparation - Elastomer Liner protocol

11.4.3. Winding

  • supply fibers, resin, peel ply and check-off material grades

  • assemble and check-off resin bath and delivery eye configuration

  • check and record resin mixture ratio

  • check-off winding program revision used

  • start winding

  • measure and record process parameters (fiber tension, resin and ambient temperature, humidity, resin and fiber consumption, in-process cure conditions)

  • measure and record layer diameter frequently (after each layer)

  • [produce retain sample? (tbd)]

  • apply peel ply


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 38 Approved by: Michael Pratt

11.4.4. Post-curing

  • transfer Precore to oven

  • check-off curing program used, start data recording

  • make sure and check-off part is rotating

  • start oven

QUALITY GATE 13: Precore - Approve Curing Protocol

11.4.5. Cutting

  • supply Precore and take up on lathe or milling machine

  • make angular mark across cut location

  • supply and check-off specified milling tool, milling program and/or cutting parameters

  • measure and record run-out before cutting

  • start machining

  • measure and record cut depth and other dimensions (cut position, laminate diameter (maybe better to measure now (not after demolding) due to low circumferential stiffness))

  • manually cut down to the mandrel surface with specified tool & process to prevent mandrel damage (tbd)

11.4.6. Demolding

  • do not remove peel ply yet to prevent contamination of surface

  • position mandrel with laminate in demolding machine

  • mount demolding aperture (two-piece) in the machined cut

  • select and check-off specified demolding gear

  • demold first half of Precore and lay down on specified support stand

  • if necessary, turn around mandrel

  • demold second half of Precore and lay down on specified support stand

  • [if applicable, demold retain sample]

  • visual inspection

  • measure and record weight, (and other dimensions if not done before)

QUALITY GATE 14: Precore - Sign-Off for assembly


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 39 Approved by: Michael Pratt

11.4.7. Joining with Compression Shaft

  • supply approved Precore and approved Joining Ring

  • supply approved Compression Shaft

  • supply and check-off specified adhesive grade

  • join one Precore half and Joining Ring

  • apply adhesive to Compression Shaft face ends according to specified method (tbd) (e.g. one bead in center of wall thickness)

  • record consumed amount of adhesive

  • apply specified adhesive gap spacers on face ends (wires? sheets?)

  • join Compression Shaft with lower half of Precore

  • join said assembly with upper half of Precore while simultaneously engaging with Compression Shaft and Joining Ring

  • apply axial joining force, check joining gap (tbd)

  • fill gap with adhesive

  • allow cure time for adhesive, record cure time and temperature (cure process tbd)

  • remove peel ply

  • visual inspection

  • measure and record weight, double-check length, measure run-out

QUALITY GATE 15: Precore - Sign-Off for overwinding

11.5. Overwinding

11.5.1. Winding

  • supply approved Precore in Manufacturing Cart, take up and position/align in winding machine (process tbd)

QUALITY GATE 16: Overwinding - Alignment verification

  • supply fibers, resin, [peel ply and/or shrink tape if needed] and check-off material grades

  • assemble and check-off resin bath and delivery eye configuration

  • check and record resin mixture ratio (process for resin mixture tbd? E.g. degassing)


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 40 Approved by: Michael Pratt
  • check-off winding program revision used

  • start winding

  • measure and record process parameters (fiber tension, resin and ambient temperature, humidity, resin and fiber consumption, in-process cure conditions)

  • measure and record rotor diameter frequently (after each n-th Ply, tbd)

  • if applicable: at end of winding step:

    • apply peel ply

    • measure weight

    • record cure conditions

    • after cure: continue at "supply fibers, ..." above

  • near end of winding: check weight and if applicable, decide on layers to be omitted (tbd).

  • at end of winding: apply specified surface finish (shrink tape or peel ply, tbd)

  • [produce retain sample ? (tbd)]

11.5.2. Post-curing

  • transfer Rotor laminate to oven

  • check-off curing program used, start data recording

  • make sure and check-off part is rotating

  • start oven

QUALITY GATE 17: Overwinding - approve cure protocol

11.5.3. Demolding

  • remove surface finish (shrink tape or peel ply) from surface

  • unmount any auxiliary parts from rotor

  • visual inspection

  • measure and record weight, dimensions (process and critical parameters tbd)

  • measure and record run-out and tolerances

QUALITY GATE 18: Overwinding - Rotor Sign Off


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 41 Approved by: Michael Pratt

11.6. Transportation conditioning.

11.6.1. Assembly of Metal Shafts and Balancing Discs

  • assemble Metal shafts for Balancing

  • Install Rotor in transportation crate

QUALITY GATE 19: Transportation - Rotor Conditioning for Balancing Sign Off


Document Title: Q5178D_Pulsar Flywheel Rotor specification
Document No. Q5178D Confidentiality: Confidential
Revision No: 10 Draft by: 0. Fischer
L. Bastard
Revision Date: Dec 12 2025 Reviewed by: Mathias Mier
Page: 42 Approved by: Michael Pratt

12. ACCEPTANCE CRITERIA

12.1. Geometrical Tolerance:

The total run-out and the axial alignment between the 2 hubs will be measured, recorded and submitted to Qnetic for approval.

Acceptance criteria:


Global tolerances for the Rotor assembly

Total run out ±5 thou = ±0.127mm
Axial alignment tolerance between the 2 hubs: ±2 thou = ±0.05mm.

Figure 24: Table containing rotor assembly tolerance

12.2. Bolt Pretention

The tightening torque of the blot connecting the metal hubs to the composite parts will be measured and recorded

Acceptance criteria: tightening torque 725Nm(±10%)

12.3. Bounded parts

All bounded parts will be photographed (Camera, Endoscope) and the precore gap will be measured and recorded.

Acceptance criteria: Approval of Qnetic based on documents provided.

12.4. Total Rotor Weight

The total rotor weight (without the extension shaft) will be measured and recorded.

Acceptance criteria: 4,500 ±10kg

12.5. Total Rotor Length

The distance between hub flats surfaces of the rotor will be measured and recorded.

Acceptance criteria: 3285±1mm

12.6. Quality Gates

Acceptance criteria: All the quality gate document and amendments are signed by both parties

END.